SPC wall panels 4 mm waterproof
Stone-plastic composite, 4 mm thin, 100 % waterproof. Approved for bathroom, shower and kitchen with proper sanitary silicone at every joint.
/
Wird geladen...
Free shipping from €299
Four properties that set the panel apart from a traditional tile wall.
Stone-plastic composite, 4 mm thin, 100 % waterproof. Approved for bathroom, shower and kitchen with proper sanitary silicone at every joint.
One panel covers 0.72 m² — fewer seams and calmer joint lines than 30 × 60 tile.
Signature Calacatta Oro marble veining with deep visual presence. Polished surface, brilliant white with bold grey and signature gold veining — the most luxurious marble variant.
SPC build, dimensions, fire rating and shipping terms for Carrara Bianco.
No reviews yet.
No mortar or silicone grout across the surface. A damp cloth lifts limescale and soap film.
Calacatta Oro is brilliant white with bold grey and signature gold veining — the most luxurious marble variant. Bright, golden, present, exclusive — a wall that adds character without overloading the room.
Calacatta Oro is engineered as a 60 × 120 cm large-format panel for modern rooms with clean line work. The polished marble effect surface reflects daylight, visually brightens small bathrooms, and works as a statement accent wall in living spaces. Three typical use-cases, each with notes on substrate prep and joint planning.
On a shower back wall or vanity wall, one panel replaces up to eight 30 × 60 tiles — no mortar joints, no silicone crosses. Approved for splash zones with proper sanitary silicone at every joint. Direct-glue over existing tiles when the substrate is within ±3 mm/m level.
See bathroom collectionIn a living room the Carrara veining works as a calm accent wall behind the sofa, TV cabinet or bed. Combined with light oak or greige tones it produces a Quiet Luxury look. The SPC core is dimensionally stable up to 60 °C — reliable near a fireplace or radiator.
Behind the sink and hob the few-joint surface wipes clean of grease and limescale fast — microfibre-soft, no harsh cleaners required. Scratch-resistant PU coating shrugs off pot strikes and sharp utensils. Fire class B1 per DIN 4102.
Measure, check the substrate, glue — with clear tool and time guidance for each step.
Enter width × height in the m² calculator. It outputs the number of 60 × 120 cm panels including a 10 % waste allowance.
Load-bearing, clean, level (±3 mm/m), dry. Repair loose tile, wallpaper or cracks first. Plan waterproofing in splash zones.
Full-bed MS polymer adhesive, press panels home, run sanitary silicone at floor, ceiling and outlets. Drop-Click profile holds without screws.
In a bathroom, joint length, cleaning effort and install time decide. A direct numbers comparison on the same square metre.
Calacatta Oro is the most expensive real marble from the Carrara valley — and in actual form for a bathroom, almost always overspec'd. The signature gold veining comes from iron inclusions during metamorphosis and is identical in no two blocks. SPC wall cladding in Calacatta Oro marble effect gives you exactly that presence — 4 mm thin, 7 kg/m² light, acid-resistant, approved for splash zones, without the €80/m²+ material cost of real Calacatta.
Versus PVC wall panels, SPC stays dimensionally stable up to 60 °C and contains no plasticisers. Marble-effect wall panels like Calacatta Oro or decor panels with gold accents pair most strongly with walnut, brass and matte-black fixtures — Calacatta Oro sits at the luxurious, character-rich end of the marble family as a white wall panel with dramatic gold veining.
The polished PU sealing is the easiest-to-care-for property of the Calacatta Oro panels. Unlike marble effect tiles with their mineral grout joints, large-format panels have almost no places for soap residue or limescale to settle. For daily care a soft microfibre cloth, lightly damp with clean water, is enough.
For heavier soiling, use a pH-neutral cleaner or diluted vinegar cleaner (max 1:10). Avoid abrasive milk, steel wool, aggressive acids and strong alkaline cleaners — they can attack the PU layer. In the shower, wipe down briefly with a squeegee after use; once a week wipe over with a drop of dish soap on a damp cloth.
The most common questions on installation, substrate, quantity and samples.
Yes. The SPC core is 100 % waterproof. Three things are critical: a properly waterproofed substrate (compound seal per DIN 18534), full-bed bonding with MS polymer adhesive, and sanitary silicone with anti-mould additive at every joint.
In most bathrooms, yes — installing wall panels over existing tiles is one of the most common use cases. The tiles must be firmly bonded, load-bearing, clean and flat (±3 mm/m). Tap every tile with your knuckle first: hollow-sounding or loose tiles must be removed and the gap filled with repair mortar.
One Calacatta Oro panel covers 0.72 m² (60 × 120 cm). The m² calculator at the top of this page takes wall width × height, adds 10 % waste and outputs the exact panel count. A typical shower back wall (2.88 m²) needs 5 panels.
Strongly recommended. marble effect reads very differently depending on daylight and wall colour — it looks different on a screen than in the room. NordPaneele ships up to three sample pieces free within 2–3 business days.
MS polymer adhesive is the standard for SPC wall panels — elastic, solvent-free and approved for splash zones. ~250–300 g/m² applied full-bed with a B3 notched trowel. Proven: Sopro MS Polymer, Soudal Fix-All High Tack, Bostik Universal Glue.
In-stock decors like Calacatta Oro ship within 2–4 business days in Germany via freight carrier. For orders before 12:00 the clock starts the same day. Austria +1 day, Switzerland +2–3 days, rest of EU 4–7 days.
