SPC Wall Panels Bianco Luminoso Marble Look

Yes. The SPC core is 100 % waterproof. Three things are critical: a properly waterproofed substrate (compound seal per DIN 18534), full-bed bonding with MS polymer adhesive, and sanitary silicone with anti-mould additive at every joint.

In most bathrooms, yes — installing wall panels over existing tiles is one of the most common use cases. The tiles must be firmly bonded, load-bearing, clean and flat (±3 mm/m). Tap every tile with your knuckle first: hollow-sounding or loose tiles must be removed and the gap filled with repair mortar.

One Bianco Luminoso panel covers 0.72 m² (60 × 120 cm). The m² calculator at the top of this page takes wall width × height, adds 10 % waste and outputs the exact panel count. A typical shower back wall (2.88 m²) needs 5 panels.

Strongly recommended. marble effect reads very differently depending on daylight and wall colour — it looks different on a screen than in the room. NordPaneele ships up to three sample pieces free within 2–3 business days.

MS polymer adhesive is the standard for SPC wall panels — elastic, solvent-free and approved for splash zones. ~250–300 g/m² applied full-bed with a B3 notched trowel. Proven: Sopro MS Polymer, Soudal Fix-All High Tack, Bostik Universal Glue.

In-stock decors like Bianco Luminoso ship in 3–5 working days within Germany via freight carrier. For orders before 12:00 the clock starts the same day. Austria +1 day, the other EU delivery countries 4–7 days.