Wird geladen...
Free shipping from €299
Free shipping from €299
100% waterproof
Mineral SPC core — it never swells, even under the constant splash water of a shower.
Grout-free
Drop-Click joints instead of silicone seams — no grout lines for mould to settle in.
Fire class B1
Flame-retardant to DIN EN 13501-1 — tested safety on your wall.
Fitted in one afternoon
Just 4 mm thin, fixed straight onto the old tiles with minimal tools — no skip required.
Substrates
The most common question before buying: what will the panel hold onto? A firm, level substrate is decisive — here are the usual cases at a glance.
| Substrate | Suitable | Note |
|---|---|---|
| Existing tiles | Yes | Firm, level and load-bearing — the ideal substrate, with no demolition. |
| Plasterboard | Yes | Screwed on dry and flat, then ready to clad directly. |
| OSB / wood-based board | With preparation | Prime it and check it for flatness, then it is suitable. |
| Fresh plaster / damp wall | No | Let it dry out fully first, otherwise nothing will bond. |
Installation
Measure
Take the back-wall area and plan the panel count with a little offcut allowance.
Cut to size
Cut the panels cleanly to height and for the fitting cut-outs.
Mount
Glue or click them edge to edge — seamless from wall to wall.
Seal
Finish the edges and joints neatly with a sanitary sealant.
Cost
Guide values for the pure material cost of the back-wall area, calculated from the current square-metre price of our range including offcut — excluding trims and sealant.
| Shower size | Area | Material cost from |
|---|---|---|
| 0.8 × 2.0 m | 1.6 m² | €86.24 |
| 1.0 × 2.0 m | 2.0 m² | €107.80 |
| 1.2 × 2.0 m | 2.4 m² | €129.36 |
Guide values incl. around 10% offcut, calculated from the lowest m² price in the range. Actual cost depends on the decor.
Design ideas
Marble look
Bright veining for a calm, premium bathroom — timeless and light.
Marble lookStone look
Natural texture with depth — striking without feeling busy.
Stone lookConcrete look
A matte, seamless surface for the clean, modern look.
Concrete lookTravertine look
Warm, sandy tones for a cosy spa atmosphere.
Travertine lookSample box
Order up to three free samples and check the colour, finish and feel right in your shower — usually delivered within two working days.
Common questions
Yes. Firm, level and load-bearing tiles are the ideal substrate. The 4 mm thin panels are glued or clicked straight over them, with no demolition.
Yes. The mineral SPC core is 100% waterproof and designed for permanent use in the splash zone of a shower.
Completely. Unlike wood-based materials, SPC does not swell — standing and splashing water cannot harm it.
A sanitary, mould-resistant silicone sealant is enough at floor and corner joints. In the surface itself there are no seams, thanks to Drop-Click.
Yes. The constant moisture and steam of a hot shower are no problem — the surface stays dimensionally stable and keeps its shape.
A typical back wall is fitted in one afternoon. As removing the old tiles is unnecessary, the shower is ready to use again the same day.
Shower Back Wall
Renew just the back wall of your shower: grout-free, 100% waterproof and fitted straight over the existing tiles — in one afternoon, with no demolition.
